• Basketball Hoop
• Reclaimed Wood
• 1/2" Plywood
• Mounting hooks
• Screwdriver and screws
Source your reclaimed wood, basketball hoop and plywood. Use a Dremel Ultra-Saw™ to cut the plywood proportionately. Then, use the Dremel Multi-Max to sand the edges of the cut wood.
Hint: Cut out the plywood backing 3" smaller than the reclaimed surface area to give you a nicer edge.
Next, secure the plywood backing to reclaimed wood using the hammer and nails.
Screw the hoop to front of the reclaimed wood, and add the net to the hoop.
Then, screw the mounting hooks to the back of the hoop, which is now ready to be mounted to the wall.
©2016 Robert Bosch Tool Corporation. All Rights Reserved.