What you'll need:
Add ambiance around your deck this season with a couple of well-placed accent lights.
• Low-Voltage Outdoor Lighting
• Tape Measure
• Additional Electical Supplies
may be needed - refer to lighting
Measure the area you wish to cut out to install the light- ensuring you are avoiding any existing hardware that may be behind that area. Bear in mind that pressure treated wood (as shown here) may be a bit tougher to cut. Additionally, the maximum depth of cut that can be easily achieved with this application is 7/8".
With the hole for your lighting complete, sand any rough areas using the Multi-Max with the MM14 Hook and Loop pad fixed with the MM70 Wood Sanding Paper. Feed the electrical cord through the hole and firmly set your new lighting fixture into place.
©2016 Robert Bosch Tool Corporation. All Rights Reserved.