• Wood Glue
• Wood Filler
• Primer and Paint
• (2) 1 x 6 x 13 for bottom left and bottom right stringers
• (2) 1 x 6 x 6-1/2 for the top left and top right stringers
• (2) 1 x 6 x 11-1/2 for the bottom closed riser and the base brace
• (1) 1 x 7 x 11-1/2 for the top closed riser (or a 1 x 6 x 11-1/2 would work as well)
• (12) Wood Screws
• (4) 8 x 1 Pocket Screws
What you'll need:
This week we're sharing a surprise project brought to you by this month's Featured Blogger- Kelly S. Rowe of Live, Laugh Rowe. Check out her blog here for other DIY projects, recipes & much much more!
Cut all of your wood to size using your Dremel Saw Max.
Drill pockets holes using Kreg into top stringers and attach to bottom stringers using pocket screws.
Attach the closed riser to the bottom front of the stringers countersinking the side screws.
Attach the back brace to the stingers.
Attach the second closed riser to the stringers, measuring 1" down and 3/8" in from front.
While this riser was built using a piece of 1 x 10 trimmed to 1 x 7 to have it sit below the bottom step, an alternative would be to use a 1 x 6 to have it sit flush with the step.
Congratulations! Your steps are officially done! You're now ready to fill your holes with wood putty, sand, prime and paint.
©2016 Robert Bosch Tool Corporation. All Rights Reserved.