• Luan Plywood- 3/4" thick
• Drill Driver
• #10 Countersink drill bit
• Baskets for cubbies (optional)
• Paint or Stain
What you'll need:
Now that the holiday decorations are packed up and put away, it's time to get organized again! Build these classic wooden cubbies to give more decorative storage for a living room or play room.
First, to create this 6-cubby shelving unit, use the Dremel Ultra-Saw to cut 7 pieces of Luan plywood into the following dimensions and quantities:
• 3 pieces of wood at 16" x 44"
• 2 pieces of wood at 16" x 30 ½"
• 2 pieces of wood at 16" x 29"
Next, you are going to create the interior dividers. Start by creating the 3/4" slots. Measure and mark with a pencil at the 3/4" x 8" spot, equally spaced in one of the 16" x 44" pieces and both of the 16" x 29" pieces of wood created in step 1.
There will only be 1 cutout in the smaller pieces of wood, and 2 total cutouts in the larger piece of wood. Refer to image 3.a.
Then, use the Ultra-Saw to cut the long cuts, and finish the slot by crosscutting with the Multi-Max and 3/4" wood blade.
Stand up the larger piece of plywood with slots in them and assemble by sliding the 2 smaller pieces of wood into the larger piece.
Drill countersink holes with a #10 countersink bit, 3/8" from the ends on the two 16" x 30 ½" boards. We placed 4 screws evenly spread across.
Now glue the ends of the wood to the top and bottom of the shelf.
Secure all ends by anchoring 3/8" screws into the top and bottom of the shelf.
Flip shelf so it is now sitting upright. Repeat drilling the countersink holes and screws to secure the interior of the cubbies to the top, bottom and sides.
Smooth the edges so they are slightly rounded with the Multi-Max and sanding pad.
Stain and paint as desired. Place baskets inside the cubby holes to add even more storage with style.
©2016 Robert Bosch Tool Corporation. All Rights Reserved.